50mm Faux Wood Venetian Blinds Wood Slate Snow Ladder Tape
Per Linea Metre - This is the width of the fabric and the quantity is the number of metres rolled off the roll
7-10 Working Days
50mm Faux Wood Venetian Blinds
Our Faux Venetian Wooden blinds are made of the highest quality components and are manufactured here in the UK making them an ideal cost-effective solution for a sleek, timeless look.
These venetian blinds are made to your specific requirements to make sure they are a perfect fit for your space. They offer you complete control, whether you require complete privacy or want to adjust the amount of light into your room by tilting the slats or raising/ lowering the blind itself. This level of light control would make it an ideal option for a home office as you can control the level of glare as the sun moves throughout the day.
They are made from 100% PVC that have the look of wood. They are incredibly durable and ideally suited to homes, bathrooms as well as hard wearing environments. They are wipeable and very easy to maintain.
The Faux Wood blinds are Fire Retardant Certified to BS5867 for flame retardancy in commercial environments, such as; care homes, hotels, schools, hostels, hospitals and more.
Wood Slate Snow Ladder Tape
These blinds are available in a range of carefully selected stylish and modern colours and finishes including ladder tapes, so you can achieve your desired look that will compliment any room and is a beautiful way to finish off your space and accentuate your window.
The Faux wood blinds are supplied with a co-ordinating headrail with snap in top fix or box end brackets available.
Benefits include:
- Made to measure blinds
- Free-hanging operation with left hand cord tilt and right hand raise and lower. (This cannot be changed).
- Box brackets with centre support.
- Minimum width – 290mm
- Maximum size – 2400mm width x 2400mm drop
- Matching and contrasting ladder tape options
- Easy to operate, maintain and clean
- 50mm Faux Wooden slats
- Made from hard wearing PVC
- Fire Retardant: Certified to BS5867
- Suitable for domestic use including: Home Offices, Bathrooms, Kitchens etc.
- Suitable for Commercial use including: Care homes, hostels, schools, hospitals etc
- Please note this product is not recommended for use in hot conditions, particularly conservatories.
Further Information about our Faux Wood Venetian Blinds
In the pictures below are are our faux wood venetian blinds in a white colour.
Our Faux Woods are Perfect for Domestic or Contract
Faux Wood blinds are 100% PVC making them entirely waterproof and ideal for installations such as kitchens or bathrooms where the moisture content is high. PVC is also inherently fire retardant, meaning this product is suitable for commercial installations as well as domestic.
. The easy to install bracket system allows for fast and efficient fitting using either top fix or box end brackets. Please note this product is not recommended for use in hot conditions, particularly conservatories as the slats can warp under intense heat.
| Delivery | 7-10 Working Days |
|---|---|
| Operation | Cord |
| Features | Daylight (Shade) |
| Flame Retardant | Yes |
| Pattern Repeat Vertical (cm) | 0 |
| Fabric Width (cm) | 140 |
What are the different curtain heading options?
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc