Exposure Blackout Fabric 23 Colours 145cm / 290cm
Per Linea Metre - This is the width of the fabric and the quantity is the number of metres rolled off the roll
Next Day Expected But Not Guaranteed. (Ex NI, SH, I)
UK Mainland Over £250
FREEExposure Blackout Fabric 23 Colours 145cm / 290cm
Fire Retardant
Suitable for Commercial Use. B1, BS 5867 Part 2 Type B, EN 13773, IMO Module B, IMO FTP Code 2010 part 7, NFPA 701 1+2, CA19, Classe Uno
Sold Per Linea Metre
Select width of fabric and then QTY is per metre.
23 Different Colours
Huge Colour Range.
Blackout Fabric
Will stop light coming through
Exposure is a contemporary textured woven look curtain fabric intended to coordinate with a wide variety of decorative fabrics and interior schemes.
Avalible in a wide range of 23 trend-led colourways
This attractive range has excellent practical qualities as it includes a three-pass blackout coating offering complete light exclusion, is stain repellent, has thermal properties and meets UK and international flame retardant standards.
Exposure Weight: 410gms.
This fabric is certified toB1, BS 5867 Part 2 B, EN 13773, IMO FTP Code 2010 part 7, NFPA 701 1+2, Classe Uno.
Fibre composition: 100% Polyester. Off white Acrylic blackout back coating
End Usage: Curtains
Width: Avalible as 145cm and 290cm
Colour Fastness to Light: 3-5
Colour Fastness to washing: 4-5
Dimensional Stability to Washing: +/- 1%
Dimensional Stability to Dry Cleaning: +/- 1%
Additional Care Instructions: When storing, pressure marks may occur. Too much weight on the pallet holding the fabric or over hang when the fabric is on the roll may cause indentations or bruising
Care instructions: 30ºC short cycle wash, do not bleach, do not tumble dry & cool iron 110ºC on non-coated side only
Pattern Type: Semi Plian
This fabric is coated with a 3pass blackout coating. This means it has been sealed 3 times and to ensure that the material is totally blackout. The coating is an off white coating which reflects heat out of a window when the curtains are drawn. The 3 pass coating also adds thermal benefits with a heat retention when used over a double glazed window of 30%. Therefore your rooms will be cooler in the summer and warmer in the winter.
| Features | Flame Retardant, Blackout |
|---|---|
| Washing / Cleaning Information Face Fabric | 40 Degrees |
| Flame Retardant | Yes |
| Delivery | Next Day Expected But Not Guaranteed. (Ex NI, SH, I) |
| Fabric Style | Plains |
| Fabric Width (cm) | See Description |
| Pattern Repeat Vertical (cm) | Contact for Details |
| Composition | See Description |
What are the different curtain heading options?
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc